Item No: 6503-R
OLDSMOBILE 50K HEI DISTRIBUTOR OLDS# 6503-R.

Price:   $42.50
 

  Quantity:  


HIGH PERFORMANCE HEI DISTRIBUTOR OLDSMOBILE V-8

COMPLETE HEI DISTRIBUTOR

OLDSMOBILE HEI DISTRIBUTOR FITS 260, 307, 330, 350, 403, 425, and 455 ENGINES.

THIS UNIT COMES WITH WITH AN OEM STYLE BLACK CAP.

LIFETIME WARRANTY!

WE ARE THE NO.1 WHOLESALE MARKETERS OF HEI DISTRIBUTORS IN THE COUNTRY.

WE HAVE MANY GARAGES AND SPEED SHOPS THAT PURCHASE THESE IN CASE LOTS FROM US. WE HAVE THE BEST HEI ON THE MARKET.

YOU CAN REPLACE YOUR POINT STYLE DISTRIBUTOR WITH THIS. THE DIFFERENCE IN PERFORMANCE IS DRAMATIC TO SAY THE LEAST.

WE HAVE POSSIBLY SOLD MORE OF THESE THAN ANYONE IN THE COUNTRY. THIS IS A TOTALLY REVISED UNIT. CANADA SHIPPING AVAILABLE, US PRIORITY INTERNATIONAL

HEI Installation instructions.

1. Unpack the distributor carefully and inspect it for possible shipping damage. Inspect again after removing the cap.

2. If the distributor to be replaced has not already been removed from the engine, remove its cap. On GM HEI distributor, unplug the pickup to coil harness from the cap. Do not remove the plug wire at this time. Crank the engine slowly until the rotor blade aims a fix point on the engine or firewall. Note this point for future reference.

3. Find the connector in the wiring from the distributor to the ignition switch, and unplug it.

4. Note the exact position of the vacuum advance canister. Put a reference mark on the engine or firewall so that the new distributor may be easily installed in the same position.

5. Loosen and remove the distributor hold-down bolt and clamp. Lift the old distributor out. If the engine had been running within the past few minutes, the distributor housing may be hot and coated with hot engine oil. Wrap a shop towel around the distributor to avoid burning your hands and dripping oil.

6. Lower the new distributor into position. The rotor should be aimed at the same fixed point as was the rotor of the old distributor, and the vacuum canister aligned with the reference mark. After the new distributor has been lowered into place, you may find that it hasn’t seated firmly against the support boss. This indicates that the lower end of the distributor shaft is not properly aligned with the oil pump drive rod. Do not attempt to force the distributor into position.

7. Reinstall the hold-down clamp and thread the bolt just enough to exert a very slight pressure against the distributor. If the distributor was not firmly seated, manually rotate the engine until the distributor drop down into place.

8. With the distributor properly seated, tighten the hold-down bold just enough so that the distributor is held in place but can still be rotated with a little effort. Again, make sure that the vacuum canister is aligned with the reference mark.

9. Remove the plug wires one at a time from the old cap and install them in the corresponding positions of the new one (on GM HEI distributors, it will also be necessary to transfer the coil and coil cover from the old cap to the new one). After all wires have been transferred, verify that the wire in the terminal post that is aligned with the rotor leads to number one cylinder. If you are unsure of cylinder number position or firing order, this information can be found in the service manual that covers your particular engine. Put on the distributor cap.

10. Reconnect the wiring leading from the distributor to the ignition switch. On GM HEI distributors, plug the pickup lead connector into the new distributor cap.

11. Connect timing light. Start the engine and allow it to warm up sufficiently to idle smoothly. It may be necessary to rotate the distributor (either clockwise or counter-clockwise) before a smooth idle can be achieved. If the engine will not idle smoothly, the firing order may be incorrect or the rotor may not have been properly aligned during installation. Consult a service manual for corrective procedure.

12. Consult the appropriate service manual to determine the factory-recommended initial timing and idle speed. Set initial spark timing with the vacuum advance line disconnected and plugged. Advancing timing two to four degrees from the factory setting will usually provide improved performance and fuel economy. However, timing advance beyond factory specification may result in detonation, which can cause engine damage. Listen carefully. If you hear the engine knocking or pinging, retard initial timing as required to eliminate it.

13 If you are converting from points to HEI, be sure that the your new unit is supplied with a full 12 volt power source. All point systems had a ballast resister that reduced voltage to around 6-8 volts. These resisters were often in the wire harness coming from the starter, and this must be eliminated. Test your power source to be sure your feeding the new HEI unit a full 12 volts. You will also need a spade terminal to tap your power source into the new unit. You can find such terminals at any auto supply. See our other listings for many HEI accessories.

WE VE BEEN ASKED MANY TIMES IF THIS IS EVERYTHING NEEDED, AND THE ANSWER IS YES. YOU DON T NEED ANYTHING ELSE TO BE UP AND RUNNING.

FULL LIFETIME WARRANTY, UNLIMITED MILEAGE!

COMPLETE DISTRIBUTOR. THIS IS THE SUPER COIL SERIES HEI DISTRIBUTOR. OUR ABSOLUTE BEST SELLING UNIT.

THIS IS THE COMPLETE DISTRIBUTOR BODY, SHAFT, GEAR, COIL, CAP, ROTOR BUTTON.

Read some of our past feedback on those that have purchased this unit, and you will be convinced of its quality and value.

THIS IS THE NEWEST VERSION ON THE MARKET. THIS UNIT HAS A PERFECTED MODULE SYSTEM VIRTUALLY ELIMINATING FAILURES!!

THIS AUCTION IS FOR THE COMPLETE HEI DISTRIBUTOR, CAP, ROTOR, DIST. BODY, GEAR, AND SHAFT. EVERYTHING YOU NEED IS WITH IT.

Notice the precision machine work the distributor body has. Many others are not like this. We have been very selective on our choice, as there are many HEI s on the market.


We have sold this same unit at our store for several years, and have many high performance engines in this area running this unit. The only difference is this is a much improved model.

We are in the performance business.

It will fit earlier model engines equipped with point style distributors. Fire wall clearance may be an issue on some early model cars, but we have found many to fit with good clearance.

  • Fully CNC Machined - Polished Housing
  • Adjustable vacuum advance canister to improve economy while cruising
  • Premium caps with brass terminals, and a low-saturation Ignition module
  • High Output Coil which Produce spark through to 7,500 RPM
  • It also offers true spark alignment for instantaneous response at high RPM
  • CALL OR EMAIL US IF YOU HAVE ANY TECHNICAL QUESTIONS 877-383-5152

This is the perfect upgrade for your vehicle, or just part of a tuneup. It would not be practical to re-install the original HEI back into your engine if you are overhauling it.

Here are a few problems you are most likely to encounter, when using an old distributor.

excessive end shaft play

bushing wear

weak coil, worn or cracked cap, and button

weak module

corrosion buildup

weakened advance springs

gear wear

if going from points to HEI this alone is a huge upgrade

All of the above can greatly affect the performance of your engine.

These are just a few of the things that most old distributors have going on with them. For the low cost of a complete brand new one, it just makes little sense to used the original distributor. . You will notice a performance difference in your engine if you have any of the above issues with your old distributor. All of the old HEI s we see have excess end play in the shaft. I m sure the coils on them are not at full voltage. This is much more than the oem model. All car makers have dramatically improved the ignition systems on cars and trucks. This is an indication of how important good ignition is to an engine.

I consider this the absolute best mod you can do to your engine for less than $55.00 ANYWHERE IN THE 48 STATE USA INSURANCE IS INCLUDED.

This distributor also has the performance curve setup. This can clearly be seen in the picture below. Do not be mislead into thinking other HEI s on the market are superior to this. If anything they are most likely the older version. We have sold more HEI s than most others around, and we do our best to provide the newest models available. The vac. advance is adjustable on this unit.

PAYMENT AND SHIPPING DETAILS

WE OFFER GREAT DISCOUNTS ON SHIPPING. YOU ONLY PAY THE FULL SHIPPING FEE ON THE HIGHEST SHIPPING COST OF YOUR ITEMS, AND HALF PRICE SHIPPING ON ALL ADDITIONAL ITEMS. FEW OFFER DISCOUNTS ON SHIPPING SUCH AS THIS. EMAIL US USING THE "ASK THE SELLER A QUESTION" TAB IF YOU WOULD LIKE US TO CALCULATE YOUR SHIPPING COST ON MULTIPLE ITEM ORDERS. YOU MAY ALSO REQUEST AN INVOICE AT TIME OF CHECKOUT. IF YOU ARE UNABLE TO CONTACT US BY EMAIL PLEASE GIVE US A CALL AT 423-722-5152 FROM 8AM-8PM EASTERN TIME MON-FRI AND 10AM-3PM ON SAT. WE WILL ANSWER YOUR EMAIL WITHIN THE ONE BUSINESS DAY IN MOST CASES, SO KEEP SHOPPING AND PAY HALF PRICE SHIPPING ON ALL ADDITIONAL ITEMS. OUR CHECKOUT SYSTEM WILL AUTOMATICALLY CALCULATE YOUR SHIPPING DISCOUNT AT TIME OF PAYMENT, SO LONG AS YOU CONSOLIDATE YOUR PAYMENT.

If you checkout and start over, the auto calculator will not recognize the multiple purchases, and there will be no shipping discount. Should you decide to start purchasing again after checking out, you will need to contact us so we can calculate your shipping for you.

IF YOU ARE HAVING DIFFICULTY PAYING WITH PAYPAL, FEEL FREE TO GIVE US A CALL AT 423-722-5152. SALES AND CUSTOMER SERVICE HOURS OF OPERATION ARE 8AM-8PM MON-FRI & 10AM-3PM SAT EASTERN TIME ZONE

FOR TECH SUPPORT, PLEASE USE THE "ASK SELLER A QUESTION TAB". IT S LOCATED AT THE TOP RIGHT HAND SIDE OF THIS PAGE. YOU MAY ALSO CALL FOR TECH SUPPORT IF YOUR UNABLE TO EXPLAIN WHAT YOU NEED IN AN EMAIL. TECH SUPPORT IS USUALLY NOT AVAILABLE UNTIL AROUND 11AM-7PM MON-FRI

FedEx is our primary shipper. We are unable to ship to APO/FPO addresses. Help us ship your order promptly by including your physical address at checkout. If your order MUST be shipped to a PO BOX, please contact us by phone. Additional charges may apply. Below is a map representing the estimated delivery time to get to you from our location.

MAP

KEY

FedEx Home Delivery delivers Tuesday - Saturday. If a package leaves here on a Thursday, and you are in a 2 day delivery zone, your package will deliver to you on Saturday. If you are in a 3 day zone, and your package leaves on a Thursday, you will not receive it until Tuesday. Expedited shipping is available upon request for an additional fee. Please contact us for rates.

Hawaii and Alaska have a 6+ day estimated delivery time.

The shipping quoted in this ad is only for the 48 continental United States. If shipping to anywhere else, please give us a call or email us for quotes. The half price shipping on all additional items also only applies to items that are being shipped in the 48 continental United States. If you have any questions, you may give a call at 423-722-5152



Check-Out
Check-Out
Check-Out

King-Bearings

Lunati

SCAT Crankshafts

Probe Industries

Hastings

Dart Heads

Mallory Ignition

Cloyes

Melling

Holley

Federal Mogul

Fel-Pro
 
ExtremeRC RC Helicopters and Extreme Parts
 


Home   Login   About Us   Contact Us   Check-Out  

Copyright © 2009, Skip White Performance