Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

M-F 8a-7p EST
Sat 10a-3p EST

5 star rating
260,500+ reviews!

 423-722-5152

FORD 347 WISECO FORGED PISTONS & RINGS 040 OVER -10cc DISH TOP KP491A4-4.040

$459.00

Available

1 customer review  



Product Information

UPC371546735323
Product TypeShipped Product
Shipping Cost $16
Number of reviews 1

WISECO FORGED PISTONS & RINGS 4.040 BORE SIZE FOR FORD 347 STROKER ENGINES, -10cc DISH TOP FOR USE WITH 5.4 BUSHED OR PRESS FIT RODS. .927 WRIST PINS INCLUDED.

 photo unnamed1.jpg


The Wiseco pistons are rated very high in the performance industry. They normally offer three levels of pistons, starting with the Pro-Tru Street version made with 4032 forged alloy. The next level up would be the Pro-Tru series that are much more expensive and made from 2618 aircraft alloy. The highest level pistons they offer are their professional line made for high level racing. Those are normally in the $700-$1100 price range.


Compression Ratio Chart

The calculations below assume your pistons are at zero deck. Let's say your compression calculates out to be 10.77, for example based on having the pistons at zero deck (flush with the deck), but your pistons were going to be .005 in the hole, then the comp. ratio would only drop to 10.63, and if left .010 in the hole, then it would drop to approx. 10.49 We do recommend having your block decked to allow the piston to set anywhere from flush (zero) to .005 in the hole for optimal performance. We used a 4.125 head gasket diameter, and a .040 head gasket thickness in our calculations to come up with our comp. ratio values.

Part Number

Cylinder Head Volume

58cc

60cc

62cc

64cc

72cc

347 Assembly

Static Compression Ratio

4.040 Bore

10.28

10.06

9.83

9.61

8.85


The picture below of the side view of the piston is a file photo, and actual appearance may vary. The picture showing the top of the Ford 347 flat top piston is an actual picture of our Wiseco Forged pistons.


 photo FORD WISECO DISH PISTON PIC 2.jpg
 photo FORD PISTON SIDE.jpg

Our Wiseco Forged pistons are custom designed with an increase in compression height. This has many advantages. Here are a few facts about compression height and deck height.

Our custom made Wiseco pistons have a compression height that is .015 taller than nearly all catalog pistons on the market. We find this to be a very valuable feature. Since our pistons sit at a taller than normal compression height, you will only have to remove approx. .010 off the deck surface of a virgin block to achieve a zero deck. This also allows for future deck re-surfacing and still not ending too far below stock deck height.


Leaving the deck on your block thick makes for a stronger block that resists flexing and also runs cooler, as the deck thickness has a lot to do with the dissipation of heat. Blocks with decks cut down to any great amount are also prone to cracking. This is why our pistons are designed to sit flush, (zero deck) at .010 below stock deck height.

Since nearly all catalog pistons on the market sit .025 below the surface of a virgin block, the only way to achieve a zero deck using such pistons would be to cut .025 off the deck surface. This compromises the integrity of the block, in our opinion. Should you decide to leave the block deck higher up, using such pistons creates a new issue of having a very poor quench/squish zone. The only way you could really take advantage of a catalog piston is by having a block that needs to or has already been butchered down to 9.00 deck height. At that point, we don't think you should not use such a block. Having the piston sitting flush with the deck is very desirable, regardless of the fact that your overall compression ratio is slightly higher than if it were sitting below the deck.


We have found that 95% of our customers are using a virgin block or a block that is close to stock deck height. This is why we have designed our pistons to have a taller compression height. On very rare occasions, you may end up with a block that has the piston out of the hole by a few thousandths and this not a problem at all. Most head gaskets are approx. .040 thick, and should you end up with a quench zone of .035, then that is perfectly ok. If the quench zone ends up too far below .035, then there are plenty of .050 thick head gaskets on the market. One more benefit to this is that most machine shops charge much more to deck a block down from stock deck height to 9.00 than they would to do a light cleanup, and that's all that's needed when using our Wiseco pistons.


Another good feature about our pistons having a taller compression height is that the ring land above the top ring is much stronger by being .015 thicker. When pistons encounter the effects of detonation, it is not uncommon to see pistons with the ring land above the top ring broken off. The thicker ring land also makes a better heat sink.

You may have noticed that our Wiseco custom made forged pistons are referred to as Racing Pistons on the package. This does not mean that the pistons are for racing only. This is a generic term, referring to their ability to be used in high performance applications as well as for street rod use. These pistons are perfectly designed for use on the street, as well as for medium to upper level drag racing.

Our custom made Wiseco forged pistons are made from 2618 aircraft alloy. We find this alloy to be much more suitable for high performance engines than the common 4032 forged alloy. You will usually see the higher end pistons on the market using 2618 aircraft alloy.

Why go with 2618 forged pistons? If you encounter certain tuning issues, detonation is highly probable, and its effects can cause severe damage to your engine. The 2618 forged piston is able to withstand the damaging effects from detonation to a higher degree than the lower cost 4032 forged pistons, especially non-forged hypereutectic pistons such as Speed Pro or Keith Black, and many others.

Our Wiseco forged pistons will clear most any valve size on the market with ease even with the use of large lift cams.

We have built approximately 3500 engines using the Wiseco pistons. The engines have been for street rod and strip use. We have seen no problems, nor have there been any complaints. They are an excellent product in every respect.

These pistons are also suitable for use with nitrous or blower setups. For the slight increase in cost, this is the best value on the market.

WISECO FULLY FORGED FLAT TOP PISTONS RATED AT 700+ HP. THIS AUCTION IS FOR A FULL SET OF PISTONS AND RINGS. WISECO PISTONS ARE 100% MANUFACTURED IN THE USA. THEY ARE ONE OF THE HIGHEST RATED PISTONS IN THE COUNTRY.

The picture below of the side view of the piston is a file photo, and actual appearance may vary.

 photo unnamed9.jpg

These pistons are for use with 5.4 full floating bushed rods, or press fit. The compression height is 1.102 RING GROOVE SIZE, 5/64 5/64 3/16 RINGS INCLUDED. SEE FULL PISTON SPECS BELOW.

HASTINGS PLASMA MOLY RING SET INCLUDED. MOST OTHER VENDORS DO NOT INCLUDE THE RINGS. THIS IS UNDOUBTEDLY THE BEST RING SET MADE FOR THESE PISTONS. 5/64 5/64 3/16 DROP-IN, NO FILING REQUIRED.

HASTINGS 2M SERIES MOLY RINGS

 photo 6ed4_1_sbl.jpg
Prefit Drop-In - Hastings Original Moly Ring Set - 5/64, 5/64, 3/16
Manufacturer: Hastings Mfg
Part #: 2M139

FULLY FORGED FLAT TOP OR DISH PISTONS RATED AT 700+ HP. THESE PISTONS ARE VERY RESISTANT TO THE DAMAGE CAUSED BY DETONATION COMPARED TO NON FORGED PISTONS. THEY HAVE TWO VALVE RELIEFS AND USE FULL FLOATING WRIST PINS.

 photo unnamed7.jpg

Item Code

KP491A4

Vendor Name

WISECO

Product Type

PISTONS, CUSTOM MADE.

Product Model

RACING STREET/STRIP

Engine Displacement (cu.in.)

347

Engine Family

FORD - Small Block V8

Material

2618 Forged Aluminum

Base Bore (in)

4.000 + .040

Stroke (in)

3.400

Rod Length (in)

5.4

Compression Height (in)

1.102

Top Type

Dish Top

Net Head Volume (cc)

-10cc

Deck Thickness (in)

0.280

Wrist Pin Diameter (in)

Use .927 rod/wrist pins.

Wrist Pin Length (in)

2.500

Wrist Pin Weight (g)

Piston Weight

APPROX. 122 grams.

APPROX. 475 grams.

Pin Lock Type

Spiral

Ring Set #

Hastings DROP IN

Top Ring Groove Size

5/64 in.

Second Ring Groove Size

5/64 in.

Oil Ring Groove Size

3/16 in.

Top Ring Land (in)

0.255

Second Ring Land (in)

0.170

Bottom Ring Land (in)

0.090

Quantity

Sold in sets of 8.


We offer these pistons in flat or dish style as well as dome top, and most other bore sizes. See our other listings.

PLEASE GIVE US A CALL AT 423-722-5152 or 877-383-5152 FOR TECHNICAL INFO. OUR HOURS ARE 8-8 EASTERN.

Customer Reviews