Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

M-F 8a-7p EST
Sat 10a-3p EST

5 star rating
260,500+ reviews!

 423-722-5152

GM CHROME POWER STEERING PUMP A-CAN STYLE S-3913

$89.25

Available



Product Information

UPC332247479486
Product TypeShipped Product
Shipping Cost $10
Number of reviews 0

GM CHROME POWER STEERING PUMP. BOLT ON PULLEY A-CAN STYLE

 photo PSBRACKET0191.jpg

The bracket is not included but for those wanting to purchase the bracket, see our other listings. You may also use the factory mounting bracket that came with most gm vehicles that had this style of pump. All of our turn key engines use this power steering pump and failures are virtually non-existent.

 photo e128_1_sbl.jpg

The above pictures are file photos. Our newest shipment will not have the black cap. It will come with a chrome cap instead. Below are pictures of the correct style cap.

Important note,

These power steering units will not work with hydro boost systems used on some of the later model GM vehicles.

Photobucket

This power steering pump uses a bolt on style pulley. We offer the brackets and pulleys for this pump in our other listings.

CHROME FINISH

Part number S-3913

The aluminum bracket is not included but for those wanting to purchase the bracket, see our other listings. All of our turn key engines use this power steering pump and failures are virtually non-existent.

This auction is for a brand new Chevy GM CHROME power steering pump. This pump will fit most cars from 1966 to 1976 that used the GM saginaw style pump with a bolt on pulley. You can use this on many other years if you have the correct brackets that apply to this style pump. This was actually the most common pump style used on GM vehicles. It has the 5/8" keyed shaft for the pulley. As you can see in the picture above the mounting holes are in the same place as the oem pump. Also notice the line configuration at the back. The nut to hold the pulley on the shaft, but does not include the pulley.The quality of the pump is very good.

This unit will accept a steel or aluminum pulley.

Shaft size is 5/8"

We offer many of the needed accessories for this pump in our other listings.

Customer Reviews

This product does not have any reviews yet.