Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

Mon.-Thurs. 8a-7p EST
Friday 8a-3p EST
Sat 10a-3p EST
(seasonal; call to confirm)

5 star rating
272,950+ reviews!





315 customer reviews  

Product Information

Product TypeShipped Product
Shipping Cost $10.50
Number of reviews 315
The items in our clearance special will be selling at well below cost prices. These items have accumulated in our former warehouse that we're converting to our new additional machine shop for building engines. In the past, we would sell these items at local swap meets and other various selling venues. Due to time constraints, these items have to go.

Go to our store to see many hundreds of such items.

There are many reasons as to why these items are being closed out. Listed below are some of the many possibilities. Most all these items are in perfectly new condition. No gimmicks. We are in a rush to get our second machine shop up and going.
  • Left over stock of an item that was discontinued in the past.
  • A few have become slow sellers for us, as our business has shifted into high value items such as engines, rotating assem. and cyl heads.
  • We have purchased some items in bulk that were discontinued and have many of these items still in stock.
  • We're trying to clear out space for our new engine room and we're in a rush to do so.
  • Acquire funds to build our second new machine shop for building engines.



 photo 9c494f02-d4f4-4cb6-ae9c-124f45a505ed.jpg

The pan depth is 2.5 inches inside, add a 1/4 inch for total outside depth. This is possibly deeper than a stock pan, so be sure you have sufficient ground clearance.

Part number 8491. Fits GM Turbo 350 transmissions.

Allen head bolts and gasket included.

The heat dissipation factors on these type pans are well known. The ribbed bottom also contributes to this, as well as the thick aluminum material.

We also have these available for the Turbo 400 and 700R4 transmissions. See our other listings.

The quality of this item is outstanding. The finish is polished to a very high luster. The pan is very thick (approx 1/8") to resist flexing and warpage.

Notice the outstanding detail around the bolt holes, and how thick this area is. Many others on the market are not made like this.

 photo 706cc3c7-7f69-4b4d-a80e-f6b8ea09910e.jpg

We sell these at our shop to many people with 4x4's, also to those with show cars. We have them at a very low cost. Nowhere else will you ever find one of these for this price. Allen head bolts and gasket are included.

The quality on our polished aluminum transmission pans is superb, as compared to many others on the market. We have seen plenty with poor workmanship. Take our word on this.

This fits the GM Turbo 350 trans.

Very Important Note!

Our sales staff has limited technical knowledge on this product and are usually unable to answer many of the questions asked. We do not have any variations of this product other than what our listings show.

    • We are not responsible for collateral damage caused by the use of this product.

    See all reviews

    Customer Reviews