Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

Mon.-Thurs. 8a-7p EST
Friday 8a-3p EST
Sat 10a-3p EST
(seasonal; call to confirm)

5 star rating
272,950+ reviews!

 423-722-5152

NEW SERIES Dart BBC Engine Block 2pc RMS 4.560 Bore STD Deck 9.8 Fully Machined

Available

$2,495.00



Product Information

UPC372852925727
Product TypeShipped Product
Number of reviews 0

NEW GENERATION DART BBC BARE BLOCK 2pc RMS. FULLY FINISHED OUT AT 4.560" BORE 9.800" STANDARD DECK HEIGHT 2PC RMS. THIS BLOCK HAS ALSO BEEN DECKED

This block is fully machined and ready for prep work. Please read the complete ad before purchasing.

Photobucket

LARGE photo LARGE.png

Dart Machinery has completely redesigned the Big M series Block. They have incorporated numerous improvements and new features to virtually every area of the block.

We now use the New Generation Dart blocks in all of our bbc engine builds. The New Generation Dart block is light years ahead in overall construction as compared to any of the other blocks on the market. Dimensional specs are spot on, and this has been an issue with other blocks we have used in the past. Many of the top engine builders, ourselves included, have found the new Dart block to be superior to the earlier generation Big M series Dart block in many ways.

Dart blocks and heads are 100% American made and are subject to stringent quality assurance procedures to ensure superior quality and performance.

Features:

  • 2-Piece Rear Main Seal
  • 4.560 Finished Bore Ready to use, (other bore sizes available)
  • 9.800" Deck Height, Also available in 10.200 tall deck version.
  • Standard BBC Camshaft Bearing Journal
  • Standard BBC Lifter Bore
  • Ductile Iron Main Caps
  • High Density 220 BHN Iron Construction
  • Priority Main Oiling
  • Bores up to 4.625" max
  • Accepts +.300" Tall Aftermarket Lifters
  • Clearance for 4.375" Stroke - 9.800" Deck
  • Splayed 4-Bolt Main Caps with Dowels & Stepped Register.
  • Accepts Standard Big Block Chevy Components
  • OE-style Fuel Pump & Starter Mounts
  • Approximately 270 lbs
  • Rated to 1000+ Horsepower
  • Made In USA

Warranty: Dart Machinery warrants its products to be free from defects in materials and workmanship. No other warranties apply.

The Dart block is bored and decked to size with our new Centroid touch probe machine. Few machine shops have a machine of this accuracy.

 photo CENTROID204.jpg

We also deck the blocks to an RA finish of approx. 15 or better. The decking procedure is also done by our Centroid CNC machine. We will deck this block to the exact specs you need.

 photo CENTROID206.jpg

When we're finished decking the block, it is within approx. .001 accuracy from end to end. Many machine shops fail to catch this as the machinery they use does not allow for such accuracy.

 photo 008202.jpg

We then plate hone the block with our new Sunnen SV15 diamond hone machine. This is also a very advanced machine that hones the block with a finish unlike conventional machines.

 photo Heads20049.jpg

The final step is to clean the block in our high pressure block washer.

    • We are not responsible for collateral damage caused by the use of this product.

    Customer Reviews

    This product does not have any reviews yet.