SBC CHEVY ALUMINUM ALTERNATOR BRACKET FITS LONG WP POLISHED # 9101-POL
|Product Type||Shipped Product|
|Number of reviews||0|
SBC CHEVY POLISHED ALUMINUM ALTERNATOR MOUNTING BRACKET FOR USE WITH LONG STYLE WATER PUMPS.
This kit is a must for those wanting a better mounting setup for the alternator. This kit is superior to the factory mounting setup in more ways than one. These really are a must for any SBC long pump setup.
It looks much better than the OEM style brackets, and it secures the alternator much better, as it uses a pivot style adjuster. The lower bracket is solid aluminum. This kit will also reduce weight considerably over the OEM setup. Others makes a near identical kit for close to three times the price. There are several versions of this kit on the market. This is the best model we have seen.
As with all of our products, we are very selective on quality, value, and usefulness. We do not sell products that fail in any of these categories. We know you will like this product, or we will offer you a full refund. We promise you'll be very impressed with its appearance.
Pictured below is one of our turn key engines that use this bracket. As you can see it looks great. Every sbc turn key engine we build uses this bracket. Intallation is very simple.
Be sure and check your belt alignment. We mention this because many water pumps and pulleys that are not original GM may have slight infractions to them. This is an easy fix if you do notice it. You can shim pulleys, as well as the alt. bracket, or you can mill the boss pad on the water pump slightly, and you can also mill the bracket if needed with ease, or in some cases add a few washers in the location needed.
No one has ever complained to this day, but that does not mean they are all running with true belt alignment. You can have a little variance in the belt alignment, but too much and you will eventually sling the belt. There are many ways to achieve better belt alignment.
One more cause for misalignment of the belts is the fact that the block has been milled. This will cause the heads to sit in a slightly different position on the block, and as you know, the upper bolt on the alt. is attached to the head, and the lower bolt connects to the bracket coming from the water pump on the block. If the block is within OEM specs, the heads may have been milled down, causing the same issue.
Notice the heim joint adjuster. This keeps the alternator very solid. It's much easier to adjust, and more secure than the OEM setup.
The fit is very good, as we never have a problem mounting them on engines at our shop.
One more very desirable feature of this setup is that it allows a great view of the many other components around it, such as the aluminum water pump, aluminum wp pulleys, timing cover, and the alternator itself. You will not see a show car without this, nor will you see a serious street rod without it. It serves both very well.
This style bracket is much lighter than the OEM brackets, yet far more stable at high rpm than the OEM setup.
As for installation, it's extremely easy, no more than 10-15 minutes. If you have the alternator already off, it is actually easier to install than the OEM setup. It does have a high tech look to it.
This bracket kit has a lifetime warranty.
Our price is better than others on the market. Our goal is keep prices low. You must also consider our shipping discount program. This brings our prices well below the competition when purchasing multiple items.
Remember this kit will work on long style SBC water pumps only. If you're not sure about what pump you have, check the clearance behind the back side of the pump. If it has approximately one inch between the pump and the timing cover, you have the long style pump. A short style pump has nearly zero clearance. They seem to be right up against the timing cover. Most cars after 1970 used the long style pump. Some have converted older cars to the long pump, so this is a rough guideline. Some Corvettes actually used the short pump on some models past 1970. Be sure of what water pump you have.
If you have a short water pump you will need a different bracket. We offer the bracket for the short water pump. See our other listings.
This product does not have any reviews yet.