Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

Mon.-Thurs. 8a-7p EST
Friday 8a-3p EST
Sat 10a-3p EST
(seasonal; call to confirm)

5 star rating
272,950+ reviews!

 423-722-5152

SBC CHEVY ALUMINUM DOUBLE LOWER CRANK PULLEY SWP 9481 CLEARANCE!

Available

$36.95



Product Information

UPC350556046287
Product TypeShipped Product
Number of reviews 0

SBC ALUMINUM DOUBLE GROOVE CRANK PULLEY FITS A SBC CRANK, WHEN USING THE SHORT STYLE WATER PUMP

 photo b70a7920-889b-43a5-93d0-9d3447aea6a8.jpg

 photo 3550e6e8-81ec-4539-82e2-9ce547ea5270.jpg

Crankshaft pulley, double groove for sbc engines using a short water pump.

The pulley in the picture above shows to have a deeper dish. The actual two groove pulley you will rec. has a very shallow dish to it to accommodate the short style water pump.

We also offer the crank and water pump pulley as a combo set, with single or double groove on the water pump. If you have a long style water pump on your engine, this pulley will not line up properly. This crank pulley is for those running a short style water pump on an sbc engine.

For other sizes and applications, please see our other listings.

Fits 55-68 approx. SB Chevy 283-350

(6.75 W/Standard Bolt Circle)

OR ANY SBC ENGINE USING A SHORT WATER PUMP

This crank pulley is for use on short water pumps used on SBC Chevy engines from 55-68

THE PULLEY HAS A RETAIL FOR $69.95 OUR PRICE IS MUCH LESS.

 photo b70a7920-889b-43a5-93d0-9d3447aea6a8.jpg

 photo 3550e6e8-81ec-4539-82e2-9ce547ea5270.jpg

Fits engines using a short water pump. This is a two groove lower crank pulley.

THESE PULLEYS ARE EXTREMELY HIGH QUALITY. WE CURRENTLY HAVE A GOOD SELECTION OF PULLEYS IN STOCK FOR SBC APPLICATIONS, HOWEVER THEY MOVE FAST, PLEASE SEE OUR OTHER AUCTIONS!

We have verified belt alignment, and found it to be spot on, but do understand that with so many aftermarket parts on your car, you may occasionally run into not having perfect belt alignment, and this is almost always remedied by shimming brackets, or hubs. A slight belt misalignment is acceptable. It is often hard to pinpoint what caused the misalignment, but as mentioned it's always an easy fix.

The items in our clearance special will be selling at well below cost prices. These items have accumulated in our former warehouse that we're converting to our new additional machine shop for building engines. In the past, we would sell these items at local swap meets and other various selling venues. Due to time constraints, these items have to go.

Go to our store to see many hundreds of such items.

There are many reasons as to why these items are being closed out. Listed below are some of the many possibilities. Most all these items are in perfectly new condition. No gimmicks. We are in a rush to get our second machine shop up and going.
Left over stock of an item that was discontinued in the past.
A few have become slow sellers for us, as our business has shifted into high value items such as engines, rotating assem. and cyl heads.
We have purchased some items in bulk that were discontinued and have many of these items still in stock.
We're trying to clear out space for our new engine room and we're in a rush to do so.
Acquire funds to build our second new machine shop for building engines.


Very Important Note!

Our sales staff has limited technical knowledge on this product and are usually unable to answer many of the questions asked. We do not have any variations of this product other than what our listings show.

    • We are not responsible for collateral damage caused by the use of this product.

    Customer Reviews

    This product does not have any reviews yet.