SBC CHEVY SCORPION ALUMINUM RACE SERIES ROLLER ROCKERS 1.5 7/16 # SCP1001
|Product Type||Shipped Product|
|Number of reviews||0|
SBC CHEVY 1.5 7/16 RACE SERIES ROLLER ROCKER ARMS FULL SET OF 16,
PART # SCP1001
Rocker Arm Mounting Style: Stud
Rocker Arm Ratio: 1.5
Stud Size: 7/16 in.
Rocker Arm Material: Aluminum
Slot Width (in): 0.600 in.
Maximum Spring Diameter (in): 1.625 in.
Quantity: Sold as a set of 16.
THE BEST HIGH PERFORMANCE RACING ROCKER ARMS MANUFACTURED IN THE USA
All Scorpion Rockers Feature:
Other benefits include:
Sting the competition with Scorpion Race Series roller rocker arms. First, these fine Scorpion rocker arms are 100 percent made in the USA. Second, they're precision-crafted by high-tech manufacturing methods, and then fully CNC-machined. Race rockers offer more clearance for retainers and springs. For a great finish to these superior rockers, the surfaces are micro-polished for maximum durability and anodized for additional protection, plus killer looks. Sting, but don't get stung with lesser quality; if you want more speed and are passionate about American-made high performance, bolt on a set of Scorpion Race series roller rocker arms.
If you’ve read our warning on engine builders using low grade no-name rods and cranks, a very similar situation exists in the roller rocker market. We do not use or sell off-shore, (no-name) roller rockers, period. They have proven to be faulty in many ways. The center trunnions are not polished, nor is the center of the roller tip true to size or polished. Metal fragments are often left inside the trunnion housing and will cause destruction of the needle bearings. The aluminum alloys used are never aircraft aluminum alloys as are used in all USA made roller rockers. They often mention the alloy as being 6061, and that is a very soft form of aluminum. The 6061 alloy used on these will assure rocker-flex on any higher than stock spring pressures, and this will affect performance. The pins and keepers that hold the parts together are often of poor quality and improperly installed. The front roller will usually scoot along the valve tip, as it can't roll properly due to rough internal surfaces.
We have honestly seen valve tips that were scalloped out due to the front roller dragging across them. This will cause the valves to side-load against the valve guides in the heads and surely cause damage to them if run like this for very long.
We have scrutinized these products in the past and found all of the above problems, and I can tell you there are most likely many more. We would not use them in an engine under any circumstances. You will also see many of these rockers made from stainless on the market. They use a very low grade stainless that actually has a near non-existent amount of nickel in them, but that's not the real problem with them, as stainless steel has no advantage over high grade heat treated steel when it comes to a roller rocker. The lack of hardness of the rocker body is the real problem. The problems with these stainless rockers are the same as mentioned above. These are the roller rockers you see on the market for around $119 and up to $169 for the so called stainless ones. They are pure junk, in our honest opinion. They could possibly be used on a budget back yard stock build up that has a very low spring pressure, with a cam that has very low lift, but then you would be better off with the stock stamped rockers on such a build.
We have heard of many engines using these rockers that came apart and spilled needle bearings into the engine, only to end up in the oil pump. It seems like some engine builders do not care how long the parts in your engine last, or they simply don't know this. I can tell you for sure that using such low grade, "no-name" roller rockers is asking for trouble.
We use Scorpion, Comp Ultra Pro Magnum, and Comp Gold Arc rockers in all of our engines. The difference in these compared to the low grade no-name rockers on the market is huge. Do a Google search on this subject and you will know then what we’re talking about.
This product does not have any reviews yet.