Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

M-F 8a-7p EST
Sat 10a-3p EST

5 star rating
260,500+ reviews!

 423-722-5152

SBF FORD 289 - 302 KING MAIN BEARINGS MB 529-SI-STD

$24.95

Available

93 customer reviews  



Product Information

UPC370583007627
Product TypeShipped Product
Shipping Cost $0
Number of reviews 93

KING MAIN BEARINGS FOR SBF FORD 289 - 302 ENGINES

NEW KING MAIN BEARINGS. photo 977659e0-4183-4b48-8330-f6b7eb55f64c.jpg

FILE PHOTO. ACTUAL APPEARANCE MAY VARY.

King bearings are outstanding in quality and unique in design. Here is where quality, design, and value all come together. This particular series is intended for use on most all style rods, and the main bearings are intended for use on all cast nodular, cast iron and cast steel crankshafts.

This auction is for a full set of main bearings. We also have a rod and main bearing combo available, as well as various sizes. See our other listings.

We have run the King bearings in brutal applications. The King Bearing Company makes engine bearings only. They also offer high end race series bearings, which are used in engines costing $50,000 or more. The name King may not be as well known as some others, but rest assured, they are very well known in the racing industry as the ultimate bearing company. Below are some of the unique features about these bearings.

Engine bearings are very critical items, and must be of high quality. We know for a fact that there are many inferior bearings on the market, and many of the so called name brands outsource the product to manufacturers that simply are not into building high end bearings. They don't address any of the critical factors such as metallurgy and design. The King bearing company specializes in engine bearings.

THE BENEFITS OF USING KING ENGINE BEARINGS

Tri-metal vs. Bi-metal Bearings

Traditional rod and main bearing construction is based upon a three layer configuration composed of a steel backing, a copper-lead layer and a very thin overlay of babbitt material only .0005" - .0008" thick.

King’s bearing uses just two layers, a high strength steel backing plus a bonded layer of "Alecular" bearing material .012" - .015" thick.

Alecular material is used exclusively by King. It is an alloy of aluminum, tin, copper and several other elements. Because it is an alloy, it maintains its properties throughout its entire depth, delivering consistent and reliable performance.

Benefit No.1 - Particle Embedability

More than half of engine bearing failures are caused by metallic particles which scratch crank journals and tear or weaken thin babbitt overlays such as in the tri-metal bearing.

Since King’s Alecular bearing layer is much thicker than the babbitt overlay (.015" vs. .0008"), it provides eighteen (18) times more embedability than a tri-metal bearing to catch and hold particles so they don’t scratch the crank journals. This is especially true for particles over .0004" in diameter which cause most of the damage.

Benefit No. 2 - Conformability

The much thicker layer of Alecular bearing material (.015" vs. .0008") allows the bearing to conform to problems such as metal to metal contact when there is mis-alignment present or the connecting rods stretch. Greater conformability means fewer bearing failures.

Benefit No. 3 - Temperature Resistance

The Alecular material’s melting/fatigue point is over 11000 F, almost three times that of the thin babbitt overlay in a tri-metal bearing (400OF). This means added protection against localized overheating due to mis-alignment, detonation, overloading, loss of coolant, etc.

Benefit No. 4 - High Load Capacity

Alecular bearings successfully withstand the stresses of blown, nitro-methane burning Top Fuel dragsters generating 5,000 hp at 8,000 rpm and in 700 hp circle track engines running for extended periods of time. The same metallurgical alloy is used in King’s street bearings that is used in King’s High Performance bearings, so the regular bearing user gets the advantage of the alloy developed and used in race engines.

Benefit No. 5 - Control of Wall Tolerance

Bearing-to-journal clearances on main and connecting rod bearings can be affected by several variables, all of which the engine builder must try to control. King has removed concerns about inconsistent shell to shell bearing wall thickness by the use of statistical control methods to keep wall thickness to very limited variation.

Other manufacturers produce bearings whose wall thickness at the crown can vary by up to + .00025". King bearings are produced using "Bull's Eye" specs which set a higher standard of controlling the wall thickness, permitting no more than + .00010" variation of the desired thickness.

The benefits of tight control of wall thickness tolerance are:

  • Improved consistency of bearing to journal clearance. No more trying different bearings within a set to get the "right" fit.
  • Superior eccentricity and crush relief values for a better oil "wedge" and less journal wear.
  • Less taper across the bearing face, meaning superior wall stability, a more parallel wall and better oil film development.
  • Crankshaft grinder does not need to grind cranks "fat" or "thin" to compensate for bearing variations.

Benefit No. 6 - Crankshaft Endplay

All bearing companies solve crankshaft journal wear by supplying oversized bearings. However, King went two steps further with the development of Max Flange and Pro Flange. Max Flange reduces endplay by supplying the flange on the high side of the tolerance to compensate for crankshaft thrust surface wear; this process is used on all King bearings. Pro Flange are bearing sets supplied with oversized flanges allowing the thrust surface to be ground to .010", .020", or .030" undersize.

See all reviews

Customer Reviews

  1. From ebay user 1***1

    super happy these guys aer the BEST bar none!!!!!!!!!!!!

    Reviewed by 1***1 on April 14, 2017, 11:10 p.m. | Permalink

    This review has no votes.

  2. From ebay user y***t

    The parts I received were exactly what I wanted thanks

    Reviewed by y***t on March 25, 2017, 9:35 p.m. | Permalink

    This review has no votes.