Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

Mon.-Thurs. 8a-7p EST
Friday 8a-3p EST
Sat 10a-3p EST
(seasonal; call to confirm)

5 star rating
272,950+ reviews!

 423-722-5152

Spectre Performance Chrome plated aluminum Shifter T-Handle # 6280 CLEARANCE!

Available

$10.95



Product Information

UPC351968637251
Product TypeShipped Product
Number of reviews 0

Spectre Performance Chrome plated aluminum Shifter T-Handle
Note, the shifter handle is all that you will recieve. A mounting kit is included.

 photo afafd40b-9ede-4295-b4c9-2f7e337094c8.jpg

Pictured below is what you will receive. The actual shifter shaft as shown above is not included.

 photo 49413a0b-ca46-42fd-a2d5-5577d589f6d6_1.jpg

 photo 8207dbd6-c80f-43cc-9ee1-6204a9a04916.jpg

The Spectre T-handle shifter gives your shifter a competition style look. It is constructed from lightweight aluminum with a durable chrome-plated finish that provides your hand a solid contour shifting experience. Comes with hardware to fit: 1/2 inch -20, 7/16 inch -20, 3/8 inch -24, 5/16 inch -18, 12 millimeter -1.50, 10 millimeter -1.50, 8 millimeter -1.25, 7 millimeter -1.00 diameter shifters.
Installation Instruction Sheet

  • Competition look
  • Comes with hardware to fit multiple sizes
  • Chrome-plated lightweight aluminum
  • Made from high quality material
  • Spectre 6280
The items in our clearance special will be selling at well below cost prices. These items have accumulated in our former warehouse that we're converting to our new additional machine shop for building engines. In the past, we would sell these items at local swap meets and other various selling venues. Due to time constraints, these items have to go.

Go to our store to see many hundreds of such items.

There are many reasons as to why these items are being closed out. Listed below are some of the many possibilities. Most all these items are in perfectly new condition. No gimmicks. We are in a rush to get our second machine shop up and going.
  • Left over stock of an item that was discontinued in the past.
  • A few have become slow sellers for us, as our business has shifted into high value items such as engines, rotating assem. and cyl heads.
  • We have purchased some items in bulk that were discontinued and have many of these items still in stock.
  • We're trying to clear out space for our new engine room and we're in a rush to do so.
  • Acquire funds to build our second new machine shop for building engines.

Very Important Note!

Our sales staff has limited technical knowledge on this product and are usually unable to answer many of the questions asked. We do not have any variations of this product other than what our listings show.

    • We are not responsible for collateral damage caused by the use of this product.

    Customer Reviews

    This product does not have any reviews yet.