Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

Mon.-Thurs. 8a-7p EST
Friday 8a-3p EST
Sat 10a-3p EST
(seasonal; call to confirm)

5 star rating
272,950+ reviews!


Ford 260 289 302W Eliminator Intake Manifold Polished # PCE147.1047 CLEARANCE!



Product Information

Product TypeShipped Product
Number of reviews 0

NEW TEST PIC. photo ca5eeddc-2784-4c6c-b799-760d75506f51.jpg

Ford SB 260 289 302W Windsor Eliminator Intake Manifold Polished

PC-4025/ PCE147.1047

PC-4025 or PCE147.1047 photo 0c17fd8e-8937-4567-8090-790cee8715c5.jpg

 photo f7337d21-6147-49be-b398-c605496995ae.jpg

To create this manifold, we took our popular PCE147.1041/PCE147.1042 Qualifier manifold for small block Fords and modified it to produce an open area under the plenum (commonly called an air gap). This design allows ambient air to pass beneath the plenum, which has a cooling effect on the incoming fuel/air charge, thus producing more power. This isolation also keeps engine heat from transferring into the plenum chamber. This manifold has several unique features such as a rearwater crossover passage, which contributes to a cooler running engine, nitrous bosses, and four corner water ports.

Brand: Speedmaster

Part Number: PCE147.1047

Part Type: Intake Manifolds, Carbureted

Product Line: Eliminator Series

Engine Block Style: Stock/OEM standard deck

Carburetor Quantity: One

Intake Style: Dual plane

Basic Operating RPM Range: 1,500-6,500

Intake Manifold Height: 4.120 in.

Intake Material: Aluminum

Intake Finish: Polished


Accepts "HOLLEY" bolt pattern, square bore carburetors, or "CARTER/Q-J" carburetors with an adapter such as the Mr.Gasket 1932.

The items in our clearance special will be selling at well below cost prices. These items have accumulated in our former warehouse that we're converting to our new additional machine shop for building engines. In the past, we would sell these items at local swap meets and other various selling venues. Due to time constraints, these items have to go.

Go to our store to see many hundreds of such items.

There are many reasons as to why these items are being closed out. Listed below are some of the many possibilities. Most all these items are in perfectly new condition. No gimmicks. We are in a rush to get our second machine shop up and going.
  • Left over stock of an item that was discontinued in the past.
  • A few have become slow sellers for us, as our business has shifted into high value items such as engines, rotating assem. and cyl heads.
  • We have purchased some items in bulk that were discontinued and have many of these items still in stock.
  • We're trying to clear out space for our new engine room and we're in a rush to do so.
  • Acquire funds to build our second new machine shop for building engines.

Important Note.

We offer a full line of the Speedmaster and Edelbrock intake manifolds. Be sure of what style manifold you need before purchasing. For installation tips, we suggest that you check the technical section of the various car forums. YouTube is also a great source for detailed installation instructions. As mentioned, we have a full line of Edelbrock manifolds in our other listings. It is our opinion that the Edelbrock manifolds are superior in quality, appearance, and performance. They are slightly higher in cost, but well worth the investment. They are also made in the USA.

Customer Reviews

This product does not have any reviews yet.