SBC BBC CHEVY HIGH TORQUE MINI STARTER 3HP BLACK JM-7001-BK
|Product Type||Shipped Product|
|Number of reviews||0|
SBC BBC CHEVY MINI STARTER
HIGH PERFORMANCE 3 HORSE POWER BLACK ANODIZED WITH CHROME BACKPLATE AND SOLENOID COVER.
2 WIRE HOOKUP.
COMES WITH CORRECT BOLTS AND SHIMS. ALSO AVAILABLE IN RED AND FULL CHROME. SEE OUR OTHER LISTINGS.
DUAL BOLT PATTERN FITS EITHER 153 OR 168 TOOTH FLYWHEEL/FLEXPLATES. ALLOWS STARTER TO BE USED WITH AUTOMATIC OR MANUAL TRANSMISSIONS.
STRAIGHT ACROSS BOLT PATTERN.
BRAND NEW IN THE BOX. WE DO NOT SELL RE MANUFACTURED OR REBUILT STARTERS.
3 HORSE POWER STARTER ALLOWS FOR SUPERIOR PERFORMANCE AS WELL AS THE GEAR REDUCTION, PRODUCING UP TO 50% MORE CRANKING POWER OVER STOCK STARTERS.
WEIGHT: 11-12 POUNDS, VS. TRADITIONAL CHEVY STARTER WEIGHING ABOUT 20 POUNDS.
2 WIRE HOOKUP
9" LONG ALLOWING BETTER CLEARANCE.
It has been reported to us that on rare occasions, one or more of the Allen head screws that hold the aluminum mounting plate may have not been properly tightened. Please check these before installing the starter. It would also be a good idea to check the screws that mount the solenoid onto the starter housing.
This is a true 3 hp mini starter. Some vendors are selling starters with a shallow back cap that are only rated at 2 hp, but claim that they are 3 hp. The back cap/plate should be approx. 1.25 inches long. The shallow 2 hp unit has a cap that is approx. half an inch deep. Please read the complete ad before deciding to buy a starter elsewhere.
As you can see in the picture above, the knurled bolts that are included are the correct length and style. Many starters on the market come with bolts of incorrect length. At least 200 thousandths or more of the knurled section should show when dropping the bolt through the alum. mounting pad. This knurled section fills the oversized pilot hole in the block, as the diameter of the knurled part of the bolt is much thicker than the threaded section.
Mounting a starter without the proper style and length bolt will cause serious problems. The bolts will flex, and the starter will shift when cranking. One or more of the bolts will break eventually, but well before this happens, the teeth on the starter and flexplate will be damaged. The problem is not the lack of knurling on the bolt, but that the knurling does not protrude past the mounting plate.
All GM blocks have this unthreaded portion in the starter mounting holes with the intent that approx. 200 thousandths of the knurled bolt will pilot into them. The picture above is exactly what you should see when dropping the bolt through the mounting plate. If you do a Google search on this issue, you will find links to many car forums addressing its importance.
When mounting the starter, be sure the gear mesh is correct, making sure that the gears don't mesh tightly. It may be difficult to see this as the dust cover is usually in the way. The long flat shims will bring the starter away from ring gear if needed. You may need to use these shims if the starter has a loud scratchy sound when cranking. This means the starter gear is meshing too tightly. We recommend removing the starter and installing both of the long flat shims to change the gear mesh. You will notice how much quieter the starter sounds. The other shims provided are for use if your starter gear is sitting too close to the flexplate and possibly touching it when the engine is running.
We have tested our sample starter on several engines with normal fitting flexplates and have found the starter to have a very decent fit right out of the box when using a well used flexplate or flywheel. Those using a new plate may want to use the two flat shims upon the first installation.
At one time we sold the 3 hp starters and stopped for a long time due to a fit issue. We tried other starters from some of our other suppliers and found them to have similar problems, or the bolts were incorrect. We are very confident that we now have a perfect unit that will give you many years of good service.
We offer a 1 year warranty on these starters, so you can buy with confidence.
This product does not have any reviews yet.