Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
3349 E. Stone Dr.
Kingsport, TN 37660

Mon.-Thurs. 8a-7p EST
Friday 8a-3p EST
Sat 10a-3p EST
(seasonal; call to confirm)

5 star rating
272,950+ reviews!

 423-722-5152

SBC CHEVY SCORPION ALUMINUM RACE SERIES ROLLER ROCKERS 1.5 7/16 # SCP1001

Available

$359.88

1 customer review  



Product Information

UPC373496637803
Product TypeShipped Product
Shipping Cost $16
Number of reviews 1
SBC CHEVY 1.5 7/16 RACE SERIES ROLLER ROCKER ARMS FULL SET OF 16,
PART # SCP1001

*** IMPORTANT NOTE ***

You may add items into your shopping cart but in order to check out you will have to call us. Our check out feature on our website is being upgraded at this time. We can take your order over the phone and answer any technical questions you may have. We accept all major credit cards, cash, check, and money orders. Just give us a call at 423-722-5152 and we can process your order promptly. In the event you attempt to reach us outside of our operating hours, please leave us a detailed message and we will return your call at our earliest opportunity.

Photobucket
Rocker Arm Mounting Style: Stud
Rocker Arm Ratio: 1.5
Stud Size: 7/16 in.
Rocker Arm Material: Aluminum
Self-Aligning: No
Polylocks included
Slot Width (in): 0.600 in.
Maximum Spring Diameter (in): 1.625 in.
Quantity: Sold as a set of 16.

THE BEST HIGH PERFORMANCE RACING ROCKER ARMS MANUFACTURED IN THE USA

All Scorpion Rockers Feature:

 

  • Aerospace-grade 7000 Series aluminum
  • Full body design
  • Precision-ground needle bearings
  • Centerless-ground fulcrum
  • Ground pin and roller
  • Burr-free trunnion through hole
  • Polylocks
  • Black oxide coated steel parts

 

Other benefits include:

  • Available in all ratios
  • Easily handle .950" lift and 950 lbs of open spring pressure
  • Clear 1.625" valve springs
  • Micropolished surfaces finish for maximum durability
  • Anodized for additional protection and aesthetics
  • Exclusive LIFETIME WARRANTY - all series

Sting the competition with Scorpion Race Series roller rocker arms. First, these fine Scorpion rocker arms are 100 percent made in the USA. Second, they're precision-crafted by high-tech manufacturing methods, and then fully CNC-machined. Race rockers offer more clearance for retainers and springs. For a great finish to these superior rockers, the surfaces are micro-polished for maximum durability and anodized for additional protection, plus killer looks. Sting, but don't get stung with lesser quality; if you want more speed and are passionate about American-made high performance, bolt on a set of Scorpion Race series roller rocker arms.

 

 

Important notice.

If you’ve read our warning on engine builders using low grade no-name rods and cranks, a very similar situation exists in the roller rocker market. We do not use or sell off-shore, (no-name) roller rockers, period. They have proven to be faulty in many ways. The center trunnions are not polished, nor is the center of the roller tip true to size or polished. Metal fragments are often left inside the trunnion housing and will cause destruction of the needle bearings. The aluminum alloys used are never aircraft aluminum alloys as are used in all USA made roller rockers. They often mention the alloy as being 6061, and that is a very soft form of aluminum. The 6061 alloy used on these will assure rocker-flex on any higher than stock spring pressures, and this will affect performance. The pins and keepers that hold the parts together are often of poor quality and improperly installed. The front roller will usually scoot along the valve tip, as it can't roll properly due to rough internal surfaces.

 

We have honestly seen valve tips that were scalloped out due to the front roller dragging across them. This will cause the valves to side-load against the valve guides in the heads and surely cause damage to them if run like this for very long.

 

We have scrutinized these products in the past and found all of the above problems, and I can tell you there are most likely many more. We would not use them in an engine under any circumstances. You will also see many of these rockers made from stainless on the market. They use a very low grade stainless that actually has a near non-existent amount of nickel in them, but that's not the real problem with them, as stainless steel has no advantage over high grade heat treated steel when it comes to a roller rocker. The lack of hardness of the rocker body is the real problem. The problems with these stainless rockers are the same as mentioned above. These are the roller rockers you see on the market for around $119 and up to $169 for the so called stainless ones. They are pure junk, in our honest opinion. They could possibly be used on a budget back yard stock build up that has a very low spring pressure, with a cam that has very low lift, but then you would be better off with the stock stamped rockers on such a build.

 

We have heard of many engines using these rockers that came apart and spilled needle bearings into the engine, only to end up in the oil pump. It seems like some engine builders do not care how long the parts in your engine last, or they simply don't know this. I can tell you for sure that using such low grade, "no-name" roller rockers is asking for trouble.

 

We use Scorpion, Comp Ultra Pro Magnum, and Comp Gold Arc rockers in all of our engines. The difference in these compared to the low grade no-name rockers on the market is huge. Do a Google search on this subject and you will know then what we’re talking about.

 

 

Skip White


Very Important Note!

 

Our sales staff has limited technical knowledge on this product and are usually unable to answer many of the questions asked. Many of the questions are, "how do you install this item", and "what pre-load to set them at". Opinions vary on this to a great degree, but anywhere between a 1/2 turn and up to a 3/4 turn seems to be the minimum and maximum. We update the info in our listings on a regular basis, and if it's not in the ad, then there's a good chance our sales staff does not know the answer. There is a solution to this for those with numerous questions about the product. We recommend searching the car forums for technical info. You will find the answers you need on the forums for certain. For those needing help on installing these, you can go to YouTube find dozens of highly informative videos showing much of the info you need.

 

  •  

     

    We are not responsible for collateral damage caused by the use of this product.

     

 

Customer Reviews

  1. From ebay user t***e

    Excellent price and quality. Fast shipping, thanks.

    Reviewed by t***e on April 22, 2021, 12:39 a.m. | Permalink

    This review has no votes.