Skip White Performance - We have the best prices you will ever find for aluminum heads, rotating assemblies and strokers
Skip White Performance
1910 Brookside Lane
Kingsport, TN 37660

M-F 8a-7p EST
Sat 10a-3p EST

5 star rating
260,500+ reviews!

 423-722-5152

SCAT BBC CHEVY 6.135" COMPETITION SERIES CONNECTING RODS # 2-ICR6135-7/16

$299.50

Available



Product Information

UPC371976132455
Product TypeShipped Product
Shipping Cost $10
Number of reviews 0

BBC SCAT PRO-COMPETITION SERIES CONNECTING RODS 6.135" I-BEAM BUSHED, 7/16's 12 POINT CAP SCREWS. EXTREME DUTY. 700+HP RATED. 4340 ALLOY.

 photo SCATCOMPETITIONRODS.jpg

The ultimate I-beam rod that incorporates the strength and technology of the H-beam rod.

  • One rib cap design for added strength and bearing support
  • Polished/Shot Peened beams to eliminate stress risers
  • Profiled clearance for stroker applications
  • Special hollow dowels and huge 7/16'' cap screw bolts greatly increase strength and horsepower capabilities
  • The Scat Pro-Comp extreme duty I-beam rods should not be mistaken for ProComp rods. These rods are made exclusively by Scat, and have nothing to do with the ProComp company. The critical sizing and installation of the ARP 7/16's cap screws is performed on a Sunnen machine in the USA by Scat Industries. These rods are excellent for those wanting the extra security offered by a rod with 7/16 ARP cap screws.

     photo KGrHqQOKnUE64YDRDGrBOyDOflOeg60_12-1.jpg  photo KGrHqMOKjsE6QcBRNyBOyDOfP0860_12.jpg

    Genuine ARP 8740 cap screws.

     photo arp-2566301_3530201.jpg

    Take notice of the design of these rods. They are far superior to conventional style I-beam rods. We are now using this rod in all of our 427 and 434 engines. These engines are making up to 610 hp, and use a 4.00" stroke crank. We also use this rod in a longer length in our big block 540/555 engines, making approx. 700+hp.

    If you do a search on the Scat Pro-Comp rods, you will find a vast amount of info on many car forums. All of the info is 100% positive. These rods are run in engines that not only produce high horsepower levels, but also run at continuous RPM. Notice the general appearance in the pictures. These rods do look impressive. The style is reminiscent of a steel billet rod. They are clearanced for most stroker applications, but as a rule, do check for clearance before finalizing your build.

    The fact that these rods are incredibly strong and well designed, made it an easy decision to use them in all of our high horsepower street/strip engines. This is the perfect upgrade to your rotating assembly.

    When comparing our prices, be aware that Scat also offers a low cost I-beam rod and it is easy to confuse the two models. The regular Scat I beam rod is not comparable to the Scat Competition Series. For the slight difference in price, the Competition Series Scat I-beam is the way to go.

    We think the Competition I-beam rods would be bullet proof in just about any street or strip rod below 700 hp. The failure rate with these rods is nearly non-existent, especially in engines running below 7000 rpm.

  • The ultimate I-beam rod that incorporates the strength and technology of the H-beam rod.
  • One rib cap design for added strength and bearing support
  • Polished beams to eliminate stress risers
  • Profiled clearance for stroker applications
  • Special hollow dowels and huge 7/16'' cap screw bolts greatly increase strength and horsepower capabilities
  • Balanced Set

    Yes

    Big End Bore Diameter (in)

    2.3250 in.

    Big End Width (in)

    0.992 in.

    Cap Retention Style

    Cap screw

    Clearanced for Stroker

    Yes

    Connecting Rod Beam Style

    I-beam

    Connecting Rod Bolt Brand

    ARP

    Connecting Rod Bolt Diameter

    7/16 in.

    Connecting Rod Bolt Head Style

    12-point

    Connecting Rod Bolt Material

    8740 chromemoly steel

    Connecting Rod Length Center to Center (in)

    6.135 in.

    Connecting Rod Material

    Forged 4340 steel

    Fastener Yield Strength (psi)

    200,000 psi

    Magnafluxed

    No

    Notes

    OE Length for bbc engines.

    Pin End Bore Diameter

    0.990 in.

    Quantity

    Sold as a set of 8.

    Remanufactured

    No

    Rod Journal Diameter (in)

    2.200 in.

    Weight Matched Set

    Yes

    Wrist Pin Style

    Floating/Bronze bushed.


    Customer Reviews

    This product does not have any reviews yet.